| |
 |
 |
|
|
 |
|
Aktuelles
|
Neu im Programm:
Kettenzüge nach BGV-D8,
BGV-D8 Plus und BGV-C1
(geeignet für Theater-/ Bühnentechnik).
|
|
 |
Non-marring grabs
Non-marring grabs are mainly used for vertical transport, lifting and rotating of plates with sensitive surfaces. If used properly, no marring or indentations occur on the material. Non-marring grabs can be used on stainless steel, aluminium or sheet steel with extremely hard surfaces.
Please note:
Please keep in mind that the friction coefficient of the coated jaws has to be maintained. This requires that the surface of the material to be transported is clean, dry, and free of oil and grease.
Non-marring grab with a load capacity of up to 1.500 kg
| Article no. |
Load
|
Jaw capacity
|
Suspension eye
Ø
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg |
4025092# |
TP-TBP 0,5
|
500 |
0 - 10
|
55 |
3,5 |
#556378 |
| TP-TBP 1,5 |
1500
|
0 - 20
|
85 |
12,6 |
#556392 |
Non-marring grab with spindle and a load capacity of up to 3.000 kg
The sliding jaw is manually set to the pre-tension position by means of a spindle, and is thus clamped. When the load is being lifted, the tensioning lever presses the sliding jaw onto the load with even more force, which is held in place by the combination of force and friction-locking.
| Article no. |
Load
|
Jaw capacity
|
Suspension eye
Ø
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg |
4025092# |
TP-TSS 0,75
|
750 |
0 - 16
|
50 |
5,7 |
#550307 |
TP-TSS 1,50
|
1500 |
5 - 25
|
70 |
9,0 |
#550611 |
| TP-TSS 3,00 |
3000
|
5 - 30
|
85 |
15,2 |
#550314 |
|
|
|
|
|
|
|
