Lifting clamps
In pairs, lifting clamps are mainly used for horizontal transport of plates and slightly sagging plates. As single clamps, they can be used to load presses, rollers, shears, and other machines.
Lifting clamp with safety lock and a load capacity of
max. 4.500 kg
A safety lock using a spring preload ensures the clamp remains on the plate, even when no load force applies. A hand lever is used to open and close the clamping jaws. This level also locks the clamping jaws in the open position.
Please note:
When used in pairs, the angle of inclination of the sling may not exceed 30°. The surface hardness of the transported material must be below HRC 30
| Article no. |
Load
(each)
|
Jaw capacity
|
Suspension eye
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg
|
4025092# |
TP-THS 0,75
|
750 |
0 – 20
|
50 |
3,2 |
#551267 |
TP-THS 1,50
|
1500 |
0 – 35 |
70 |
6,1 |
#550734 |
TP-THS 3,00
|
3000 |
0 – 40 |
80 |
12,6 |
#551373 |
TP-THS 4,50
|
4500 |
0 – 40 |
90x127 |
16,5 |
#553483 |
Lifting clamp with a load capacity of max. 9.000 kg
The clamps, when used in pairs, are especially well-suited for horizontal transport of thin plates that have a tendency to sag.
Please note:
When used in pairs, the angle of inclination of the sling may not exceed 30°. The surface hardness of the transported material must be below HRC 30.
| Artikel-Nr. |
Load
(per pair)
|
Jaw capacity
|
Suspension eye
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg
|
4025092# |
TP-THK 0,75
|
750
|
0 - 25
|
20 |
1,7 |
#550628 |
| TP-THK 1,50 |
1500 |
0 - 35 |
25 |
3,1 |
#550284 |
TP-THK 3,00
|
3000 |
0 - 35 |
30 |
5,3 |
#550390 |
TP-THK 4,50
|
4500 |
0 - 45 |
30 |
8,4 |
#551120 |
TP-THK 6,00
|
6000 |
0 - 60 |
35 |
11,6 |
#551038 |
TP-THK 9,00
|
9000 |
0 - 60 |
40 |
17,9 |
#551960 |
On request, lifting clamps with rolls, as well as a 45° angle of inclination on the sling, and a load capacity of 5,000 kg can be provided!
|
