Girder grabs
 Girder grabs for horizontal transport
Load: max. 7.500 kg
The TP-TTG girder grabs are suitable for horizontal transport of sheet metal, profiles and girders. The offset suspension eye ensures that the flanges of the girder will be kept practically horizontal during transport. The transported material is secured at the grab by means of a safety lock with spring tension, even when lifting is not taking place. The clamping jaws are opened, closed and locked by means of a lever.
Please note:
For the transport of long girders, we recommend using the grabs in pairs. The surface hardness of the transported material must be below HRC 30.
| Article no. |
Load
|
Jaw capacity
|
Suspension eye
Ø
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg |
4025092# |
TP-TTG 0,5
|
500 |
0 - 20
|
50 |
2,9 |
#557931 |
| TP-TTG 1,5 |
1500
|
0 - 30
|
70 |
6,8 |
#550239 |
| TP-TTG 3,0 |
3000
|
0 - 35
|
80 |
11,3 |
#550192 |
| TP-TTG 4,5 |
4500
|
0 - 40
|
90 |
14,8 |
#550451 |
| TP-TTG 7,5 |
7500
|
0 - 45
|
110 |
30,0 |
#551205 |
Girder grabs for horizontal transport
Load: max. 4.500 kg
The TP-TTT girder grab is suitable for horizontal transport of sheet metal, profiles and girders. The slotted fixed jaw can be attached to the front face of the girder. For this application, the girder grabs always have to be used in pairs, as a two-legged harness. The transported material is secured at the grab by means of a safety lock with spring tension, even when lifting is not taking place. The clamping jaws are opened, closed and locked by means of a lever.
Please note:
The angle of inclination of the sling may not exceed 30°.
The surface hardness of the transported material must be below HRC 30.
| Article no. |
Load
|
Jaw capacity |
Suspension eye
Ø
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg |
4025092# |
TP-TTT 0,75
|
500 |
0 - 20
|
50 |
3,0 |
#558501 |
| TP-TTT 1,5 |
1500
|
0 - 30
|
70 |
6,0 |
#558518 |
| TP-TTT 3,0 |
3000
|
0 - 35
|
80 |
10,0
|
#558525 |
| TP-TTT4,5 |
4500
|
0 - 40
|
90 |
16,0 |
#558532 |
Girder grab for vertical transport
Load: max. 3.000 kg
The TP-TTR girder grabs are suitable for vertical transport of girders. The slotted fixed jaw can be attached to the front face of the girder. For this application, the girder grabs always have to be used in pairs, as a two-legged harness. The transported material is secured at the grab by means of a safety lock with spring tension, even when lifting is not taking place. The clamping jaws are opened, closed and locked by means of a lever.
Please note:
For the transport of long girders, we recommend using the girder grabs in pairs, together with a spreader beam.
| Article no. |
Load
|
Jaw capacity
|
Suspension eye
Ø
|
Weight |
EAN no. |
| |
kg |
mm |
mm |
kg |
4025092# |
TP-TTR0,75
|
500 |
5 - 16
|
50 |
3,1 |
#550499 |
| TP-TTR 1,5 |
1500
|
5 - 25
|
70 |
6,8 |
#550246 |
| TP-TTR 3,0 |
3000
|
5 - 28
|
80 |
10,9 |
#550550 |
|
